Characteristics of HCTB/RCTB Constant Temperature Water Bath

Constant temperature liquid circulation bath
The temperature stability is ±0.005°C
Temperature range -40 to 250 ° C (-40 to 452 ° F) available
Five bathtub sizes, 8 to 48 liters, or to be used with existing bathtubs or containers
High pump capacity with external connections
Adjustable over temperature cut-off application
Use as a calibration standard
Laboratory and Biology
Pressure and impact testing
Including the installation bridge for the ascending bath

HCTB/RCTB thermostatic water bath can choose from three temperature controllers with analog or digital temperature selectors for temperature management in the temperature range of -40 to 250 ° C, with stability up to ± 0.005 ° C. Each model has a sturdy splash proof housing, and all submerged components are made of stainless steel or high-temperature self extinguishing plastic. All models come standard with a powerful pressure circulation pump with an external circulation connection. Three different temperature controllers and five stainless steel baths with capacities ranging from 8 to 48 liters can be selected, providing 15 different systems to accommodate most laboratory and industrial applications. The inlet and outlet pipes at the rear of the controller can be used for external circulation to another device or sealed for circulation within the bath itself. This bath is also suitable for applications below ambient temperature, and can be used with cooling coils or RCTB-3000 series immersion and flow coolers at temperatures below room temperature.

A bathtub without heating
These new bathtubs are designed for the HCTB-3000 series temperature regulator, featuring an attractive carrying handle that enhances * * performance. The four smaller models feature seamless stainless steel interiors for easy cleaning. The Bath-48 * large bathtub adopts a welded structure. All bathrooms have enamel steel shells with painted finish.

Immersion and flow cooler
The RCTB-3000 series immersion and flow coolers are designed for temperatures below -35 ° C and below ambient temperature. The flow cooler is used in conjunction with the heat regulator. Continuously extract heat from the bath solution through a heat exchanger built into the device.

The cooling head of Dip Cooler can be neatly and inconspicuously embedded in the corner of the bathtub, and can be fixed with specially designed mounting brackets. Even though cold tap water can achieve cooling, it is recommended to use an immersion cooler as it can save water and be more convenient to use.