186-1523-0752
0531-88975421
HX94B temperature and humidity transmitter
Product Introduction：
Product models: HX94BC, HX94BV0, HX94BV1, HX94BV2 Product manufacturer: Omega, USA- Consultation Hotline：18615230752 Landline：0531-88975421
Product Details
Technical parameters
Application scenarios
Optional accessories
Contact Us
The HX94B temperature and humidity transmitter is an HX94B temperature and humidity transmitter. The HX94B temperature and humidity transmitter is a relative humidity/ambient temperature transmitter that has obtained RoHS certification and can achieve a relative humidity of ± 2.5% and a temperature of ± 0.6 ° C (± 1 ° F). It has two independent analog outputs, humidity and temperature
Characteristics of HX94B Temperature and Humidity Transmitter
Relative humidity/ambient temperature transmitter
RoHS certification
**To a relative humidity of ± 2.5% and a temperature of ± 0.6 ° C (± 1 ° F)
Two independent analog outputs, humidity and temperature
Four analog outputs are available, 4 to 20 mA, 0 to 1V, 0 to 5V, 0 to 10V
Stainless steel NEMA 4 (IP66) casing
Provide three different output connection forms
Hardware including wall and duct installation
Detachable stainless steel sensor cap
HX94B Temperature and Humidity Transmitter Description
OMEGA ™ The HX94B series temperature/relative humidity transmitter provides linearized and temperature compensated output signals of 4 to 20 mA, 0 to 1 Vdc, 0 to 5 Vdc, or 0 to 10 Vdc, depending on the temperature/relative humidity measurement. The output signal has been calibrated, with a temperature range of 0 to 100 ° C and a relative humidity range of 0 to 100%. The digital temperature and relative humidity sensors are protected by stainless steel covers and easy to clean. NEMA 4 stainless steel casing and cable entry connections provide wind and rain protection. Stainless steel shell termination to 6-foot shielded cable. The end of the cable is a bare lead or terminal to a 4-pin connector.
